dictionary = 
{
	["DictKey_descriptionNeutralsTask_4"] = "",
	["DictKey_sortie_5"] = "",
	["DictKey_descriptionText_1"] = "Basic F-14B Type Rating Check Ride, two basic skills sorties plus Upgrade sortie\
\
Sortie 1: Loadout 1(PH)-1(SP)-2(SW)+Guns, empty ETs\
\
Configure your front radio manually to 285.00Mhz (Texaco Freq)\
Takeoff and perform a standard CASE 1 departure: fly at least 7NM below 500ft on BRC 281\
Turn back and climb to rejoin Texaco over the carrier at 6000 ft.\
Form up on Texaco's left wing, like you're their wingman or preparing to take fuel. If you want to show off, transition to pre-contact and hook up. Otherwise, transition over to Texaco's right side. Don't fly directly behind him.\
\
Fly WP2 via WP1\
Engage enemy air threat coming from beyond WP3, using following sort plan:\
Shoot RIGHT man first, if right man cannot be identified on TID then shoot TRAIL man first.\
After making first kill in BVR, merge with the remaining threat aircraft and make a rear-quarter kill.\
Return to spectators and get ready to fly sortie 2.\
\
Sortie 2 jet loadout:\
4000 lbs fuel\
1A- AIM-9M (LAU-138)\
1B- LTS pod\
2 - ET (empty)\
3- Mk-83 AIR\
4- GBU-12\
5- CBU-99 (FMU-140, 1500ft VT)\
6- Mk-83 AIR\
7- ET (empty)\
8B - AIM-7P\
8A- AIM-9M (LAU-138)\
\
1. Follow the flight plan (WP1-WP2-ST) while maintaining an efficient fuel usage (Max climb, max range, and max endurance profiles as needed). Ascend to 20000 feet by WP1.\
2. Engage one of the trucks at ST with a GBU-12.\
3. Engage another truck at ST with a CBU-99 in CMPTR PLT mode. You can use the F10 menu to request smoke on the targets as you run in.\
4. Using your remaining 2 Mk83 AIR bombs, execute a low level CMPTR TGT bombing on the remaining trucks using RIPPLE 2 with 200ms interval.\
5. Sortie complete, deslot and reslot into the Upgrade slot if you wish to do your F-14B(U) upgrade sortie, otherwise send the Tacview recording of your attempt to your proctor/grader.\
\
Upgrade jet loadout:\
8000 lbs fuel\
1A- AIM-9M (LAU-138)\
1B- LTS pod\
2 - ET (empty)\
3- GBU-10\
4- GBU-31(v)4\
5- GBU-31(v)4\
6- GBU-31(v)2\
7- ET (empty)\
8B - AIM-7P\
8A- AIM-9M (LAU-138)\
\
Before hitting FLY, make sure to use the DTC interface to import the provided DTC.\
\
Spawn in and use JESTER to select the flight plan for Sortie 3. Navigate via WP1 & WP2, using efficent climb & cruise profiles. While cruising, use JESTER to set up stations 4 and 5 for their respective PP1 targets.\
Employ stations 4 and  5 at their respective pre-planned release points.\
Use Jester to mark the Surface Target waypoint (WP 2) as an LTS point. It will enter the mission computer as LTS steerpoint 2.\
Using JESTER LANTIRN, engage trucks at LTS steerpoints 1 and 2 with a TOO JDAM and a GBU-10.\
\
After completing the engagements, tune TACAN to 12X and overfly the beacon. Return to Spectators.\
\
CVN 75\
TACAN: 75X\
UPGRADE CVN TACAN 76X",
	["DictKey_descriptionBlueTask_3"] = "",
	["DictKey_ActionText_7"] = "You can request smoke to mark your targets via the F10 radio menu.",
	["DictKey_ActionRadioText_6"] = "Mark Sortie 2 Targets",
	["DictKey_descriptionRedTask_2"] = "",
} -- end of dictionary
